DSP PLL Digital Stereo FM Radio Receiver Module 87-108MHz With Serial Control

• Popularity - 17517 views, 2502.4 views per day, 7 days on eBay. Super high amount of views. 171 sold.
• Price - Avg: $0.00, Low: $0.00, High: $0.00. Best quality when compared to PicClick similar items.
• Seller - + items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

Visit store<br>Items for sale<br>About us<br>Product Details<br>Features:<br>1: the use of advanced digital audio signal processing (DSP) and FM modulation phase-locked loop (PLL) to make sound more realistic, more stable performance, long working hours without frequency offset.<br>2: LCD display is more intuitive and accurate, with a very low power consumption and minimal noise.<br>3: Can search for radio stations and store radio function, easy to operate.<br>4: Built-in 30 digital volume adjustment button operation can be easily done.<br>5: automatic power-down memory data before the power failure.<br>6: speaker / headphone output automatic switching<br>7: quartz crystal frequency stabilization, the temperature change is no longer receiving frequency drift.<br>9: The professional audio DSP audio signal analysis and processing, automatic mute no signal or weak FM signal noise floor of the big time, away from the traditional FM radio signal or the signal is weak in the absence of annoying when rustle.<br>10: digital incremental rotary encoder to adjust the volume and frequency of use feel good, precise positioning, stable and durable, 360 ° rotation without dead ends.<br>11:30-level digital volume adjustment range<br>12: Support for serial communication control, use other computer or device control MCU module with serial full functionality.<br>Product parameters: Output power: 500mW (drive headphones), 3Wx2 (driving the speaker)<br>Frequency range: 50Hz-18KHz<br>Receiving frequency range:<br>Close the campus radio 87.0MHz-108.0MHz,<br>Open campus radio 76.0MHz-108.0MHz<br>Equivalent noise: ≥30dB<br>Supply voltage: 3.0V-5.0V<br>Supply Current: maximum volume 1000mA, minimum volume at 60mA (for reference only)<br>Channel: Stereo<br><1>: Power<br>The corresponding module port (PCB board labeling) -, +, respectively, then the power supply (battery) negative electrode and a positive electrode, a battery or other power source is recommended power supply. You can not use switching power supply without a filter (such as mobile phone chargers, and other switching power supply), or interfere with the power generated will affect the normal operation of the module. This module normal operating voltage of 3.0-5.0V, be careful not to exceed the supply voltage range.<br><2>: Antenna<br>FM_ANT port used to connect FM antenna for better reception FM signal, we recommend an external 75cm length of the rod antenna.<br><3>: headphone / speaker output<br>The module comes with 3WX2 channel audio amplifier, speakers To access the speaker ports is recommended 4Ω / 3W speakers. Such as plug in your headphones, audio is automatically switched to the headset channel speaker channels automatically shut down.<br><4> Volume control<br>Turn the VOL encoder to adjust the volume, while the LCD screen shows the volume series.<br><5> frequency regulation<br>FRE rotation encoder, receiving frequency, while the LCD screen displays the current frequency down short, encoder handle press to mute / un-mute switch.<br><6> Mute<br>Press VOL knob down mute / un-mute<br><7> Auto mute switch<br>Press down FRE knob turned on or off automatic mute function, LCD display captions ON Enables automatic squelch, OFF means turn off the automatic squelch.<br><8> Automatic squelch threshold (Threshold) Adjustment (automatic mute switch opens effective)<br>Press FRE knob down, into the automatic squelch threshold adjustment interface, the user can use specific actions to adjust the automatic squelch threshold, adjustment range is 0-20, the higher the value, the more limited the door, the more likely weak signal Mute. On the contrary the opposite.<br><9>: access the serial port (not serial control without contact)<br>TTL level serial port module reserve control interface, TTL serial communication module of the need to connect UART_RX, UART_TX and GND Module (PCB corresponding to the location, there is marked), you can use an external MCU (microcontroller) or PC serial port to send commands associated control module Features. Note: Due to computer serial port level is not a TTL level, when connected to a computer connected to RS323 communication required to TTL level electrical switching device paperback or use USB to TTL level serial port module to communicate wit